Home
About
Benefits
Technical Info
Certifications
Installation
Flange Identification Table
Quality Assurance
FAQs
News
Contact
Order Now
CRISM to CRISM (Straight Coupling)
This field is hidden when viewing the form
Product
CRISM to CRISM (straight coupling
CRISM to CRISM reducing coupling
CRISM to CRISM 90⁰elbow
CRISM to CRISM 45⁰ bend
CRISM to flange
Size
This is the size (Outside Diameter) of your pipe.
¾” - (DN 20mm), outside diameter 26.70 mm
1” - (DN 25mm), outside diameter 33.40 mm
1 ¼” - (DN 32mm), outside diameter 42.20 mm
1½” - (DN 40mm), outside diameter 48.30 mm
2” - (DN 50mm), outside diameter 60.30 mm
2 ½” - (DN 65mm), outside diameter 73.00 mm
3” - (DN 80mm), outside diameter 88.90 mm
3 ½” - (DN 90mm), outside diameter 101.60 mm
4” - (DN 100mm), outside diameter 114.30 mm
5” - (DN 125mm), outside diameter 141.30 mm
6” - (DN 150mm), outside diameter 168.30 mm
End Size
1”
1 ¼”
End Size
¾”
1 ¼”
1½”
End Size
¾”
1”
1½”
2”
End Size
1”
1 ¼”
2”
2 ½”
End Size
1 ¼”
1½”
2 ½”
3”
End Size
1½”
2”
3”
3 ½”
End Size
2”
2 ½”
3 ½”
4”
End Size
2 ½”
3”
4”
5”
End Size
3”
3 ½”
5”
6”
End Size
3 ½”
4”
6”
End Size
4”
5”
Required Flange Type & Pressure Value
Please see the
Flange Identification Table
for available types and values.
Raised Face or Flat Face?
Raised Face
Flat Face
Seal Material
Nitrile/Buna-N
Viton® (Fluorocarbon Type A)
Silicone
EPDM (Ethylene Propylene)
Aflas® (TFE/P)
Neoprene®
Polyurethane
Fluorosilicone
FFKM (Perfluoroelastomer, Markez®, Chemraz® / Kalrez® / Simriz®)
Other
Special seals can be requested, please type in what your preferred sealing material is if not available above.
Do you require a Gasket?
Yes
No
Gasket Type
Please check gasket type on
klinger.com.au
.
Do you require Studs?
Yes
No
Stud Material
Enquiry
CAPTCHA
Quantity
Add to cart
Add to quote
