Home
About
Benefits
Technical Info
Certifications
Installation
Flange Identification Table
Quality Assurance
FAQs
News
Contact
Order Now
CRISM to CRISM 45⁰ bend
This field is hidden when viewing the form
Product
CRISM to CRISM (straight coupling
CRISM to CRISM reducing coupling
CRISM to CRISM 90⁰elbow
CRISM to CRISM 45⁰ bend
CRISM to flange
Size
This is the size (Outside Diameter) of your pipe.
¾” - (DN 20mm), outside diameter 26.70 mm
1” - (DN 25mm), outside diameter 33.40 mm
1 ¼” - (DN 32mm), outside diameter 42.20 mm
1½” - (DN 40mm), outside diameter 48.30 mm
2” - (DN 50mm), outside diameter 60.30 mm
2 ½” - (DN 65mm), outside diameter 73.00 mm
3” - (DN 80mm), outside diameter 88.90 mm
3 ½” - (DN 90mm), outside diameter 101.60 mm
4” - (DN 100mm), outside diameter 114.30 mm
5” - (DN 125mm), outside diameter 141.30 mm
6” - (DN 150mm), outside diameter 168.30 mm
End Size
1”
1 ¼”
End Size
¾”
1 ¼”
1½”
End Size
¾”
1”
1½”
2”
End Size
1”
1 ¼”
2”
2 ½”
End Size
1 ¼”
1½”
2 ½”
3”
End Size
1½”
2”
3”
3 ½”
End Size
2”
2 ½”
3 ½”
4”
End Size
2 ½”
3”
4”
5”
End Size
3”
3 ½”
5”
6”
End Size
3 ½”
4”
6”
End Size
4”
5”
Required Flange Type & Pressure Value
Please see the
Flange Identification Table
for available types and values.
Raised Face or Flat Face?
Raised Face
Flat Face
Seal Material
Nitrile/Buna-N
Viton® (Fluorocarbon Type A)
Silicone
EPDM (Ethylene Propylene)
Aflas® (TFE/P)
Neoprene®
Polyurethane
Fluorosilicone
FFKM (Perfluoroelastomer, Markez®, Chemraz® / Kalrez® / Simriz®)
Other
Special seals can be requested, please type in what your preferred sealing material is if not available above.
Do you require a Gasket?
Yes
No
Gasket Type
Please check gasket type on
klinger.com.au
.
Do you require Studs?
Yes
No
Stud Material
Enquiry
CAPTCHA
Quantity
Add to cart
Add to quote
